Zippy MTW2-5AD0B2V 500W 2+1 Redundant Power Supply
Dimension: (WxDxH)
101 x 300 x 84 mm
3.98 x 11.81 x 3.31 inch
3-31/32 x 11-13/16 x 3-5/16 inch
Connectors:
-
1x 24-pin ATX Main Connector
-
1x 8-pin EPS 12V
-
1x 4-pin P4 12V
-
1x 6-pin AUX
-
13x 4-pin Peripheral / IDE Power
-
3x 4-pin Floppy Power
-
1x 2-pin 3.68mm Buzzer Reset
-
1x 2-pin 2.54mm TTL Signal
-
1x LED Indicator
-
(Optional configurations may include SATA connectors)
Features:
-
Redundant 2+1 Hot-Swappable Modules
-
Industrial-grade reliability
-
Active PFC (Full Range), meets IEC-1000-3-2 Class D
-
Dual EMI Filters: FCC Class B, CISPR22 Class B
-
Safety Certifications: UL, CSA, TUV
-
Supports ATX 2.03 / EPS12V / WTX / AMD-GES
-
Designed for Server / Storage / IPC / Workstation systems
Temperature Range:
-
Operating: 0°C ~ 40°C
-
Storage: -20°C ~ 70°C
Humidity:
-
Operating: 20% ~ 95%
-
Non-Operating: 10% ~ 95%
95% RH requires conformal coating treatment
Cooling:
-
2x 38×38×28 mm DC Fans (per module)
AC Input:
-
Voltage: 105 ~ 264VAC Full Range
-
Frequency: 47 ~ 63 Hz
-
Independent AC input for each module
Specification:
Output Wattage: 500W (per module)
Supported Standards: ATX / EPS / WTX / GES
Output Characteristics:
Output | Voltage | Min. Output Current | Max. Output Current | Regulation | Line Regulation | Ripple & Noise (Max P-P) |
---|---|---|---|---|---|---|
+3.3V | 3.3V | 1A | 24A | ±5% | ±1% | 50mV |
+5V | 5V | 2A | 30A | ±5% | ±1% | 50mV |
+12V | 12V | 2A | 32A | ±5% | ±1% | 120mV |
-12V | -12V | 0.05A | 0.7A | +5% ~ -10% | ±1% | 120mV |
-5V | -5V | 0.05A | 0.7A | +5% ~ -10% | ±1% | 120mV |
+5VSB | 5V | 0.1A | 2A | +6% ~ -5% | ±1% | 50mV |
Power Notes:
-
Combined +3.3V and +5V output not to exceed 43A
-
Total output per module must not exceed 500W
Zippy 850W PSL-6850P Single, Non-Redundant
Dimension: (WxDxH)
150 x 86 x 200 mm
5.91 x 3.39 x 7.87 inch
5-29/32 x 3-13/32 x 7-7/8 inch
Connectors:
-
1x 24-pin Main Connector
-
1x 8-pin EPS 12V
-
1x 4-pin P4 12V
-
1x 6-pin AUX
-
9x 4-pin Peripheral / IDE Power
-
2x 4-pin Floppy Power
-
8x Serial ATA Power
-
1x 2-pin 3.68mm Buzzer Reset
-
1x 2-pin 2.54mm TTL Signal
-
1x LED Indicator
Features:
-
Active PFC (Full Range), meets IEC-1000-3-2 Class D
-
Industrial-grade reliability
-
High-efficiency design
-
Hold-up Time: ≥16ms at full load & 115VAC input
-
Dual EMI Noise Filter (FCC Class B, CISPR22 Class B)
-
Safety Certifications: UL, cUL, TUV, CE
-
Designed for Server / Storage / IPC systems
Temperature Range:
-
Operating: 0°C ~ 50°C
-
Storage: -20°C ~ 70°C
Humidity:
-
Operating: 20% ~ 95%
-
Non-Operating: 10% ~ 95%
*95% requires conformal coating treatment
Cooling:
-
1x 80mm Internal Fan (Auto speed control)
AC Input:
-
Voltage: 90 ~ 264VAC Full Range
-
Frequency: 47 ~ 63 Hz
Specification:
Output Wattage: 850W
ATX12V 2.3 / EPS12V / SSI EPS Specification
Output Characteristics:
Output | Voltage | Min. Output Current | Max. Output Current | Regulation | Line Regulation | Ripple & Noise (Max P-P) |
---|---|---|---|---|---|---|
+3.3V | 3.3V | 1A | 24A | ±5% | ±1% | 50mV |
+5V | 5V | 2A | 30A | ±5% | ±1% | 50mV |
+12V1 | 12V | 1A | 18A | ±5% | ±1% | 120mV |
+12V2 | 12V | 1A | 18A | ±5% | ±1% | 120mV |
+12V3 | 12V | 1A | 18A | ±5% | ±1% | 120mV |
+12V4 | 12V | 1A | 18A | ±5% | ±1% | 120mV |
-12V | -12V | 0.05A | 0.8A | +5% ~ -10% | ±1% | 120mV |
+5VSB | 5V | 0.1A | 3A | +6% ~ -5% | ±1% | 50mV |
Remarks:
Total combined +3.3V and +5V output not to exceed 200W
Combined +12V outputs not to exceed 800W
Total output power must not exceed 850W
Corsair RM1000x 1000W Fully Modular Power Supply
Dimension: (WxDxH)
150 x 160 x 86 mm
5.91 x 6.30 x 3.39 inch
5-29/32 x 6-5/16 x 3-13/32 inch
Connectors:
-
1x 24-pin ATX Main Connector
-
2x 8-pin (4+4) EPS/CPU Connectors
-
6x 8-pin (6+2) PCIe Connectors
-
14x SATA Power Connectors
-
4x 4-pin Peripheral (Molex)
-
1x Floppy (via Molex adapter)
Features:
-
Fully modular cables for easy builds and clean cable management
-
100% industrial-grade, 105°C rated Japanese capacitors
-
Zero RPM fan mode for silent operation at low loads
-
Low-noise operation with rifle bearing 135mm cooling fan
-
80 PLUS Gold certified for high efficiency
-
Supports ATX12V v2.4 and EPS12V standards
-
Over Voltage, Under Voltage, Over Current, Over Power, Over Temperature, and Short Circuit Protections
Temperature Range:
-
Operating: 0°C ~ 50°C
-
Storage: -20°C ~ 70°C
Humidity:
-
Operating: 20% ~ 90% (non-condensing)
-
Storage: 10% ~ 95% (non-condensing)
Cooling:
-
1x 135mm Rifle Bearing Fan (with Zero RPM Mode)
AC Input:
-
Voltage: 100 ~ 240VAC Full Range
-
Frequency: 47 ~ 63 Hz
-
Current: 13A–6.5A
Specification:
Output Wattage: 1000W
Form Factor: ATX
Efficiency: 80 PLUS Gold
MTBF: 100,000 hours
Output Characteristics:
Output | Voltage | Max Output Current | Max Combined Wattage |
---|---|---|---|
+3.3V | 3.3V | 25A | 150W (combined +3.3V & +5V) |
+5V | 5V | 25A | — |
+12V | 12V | 83.3A | 999.6W |
-12V | -12V | 0.3A | 3.6W |
+5VSB | 5V | 3A | 15W |
Power Notes:
-
Single +12V Rail
-
Maximum combined output: 1000W
-
Full protection circuitry for system safety
Zippy 950W M3W-6950P 2+1 Redundant
(Disclaimer: We are no longer using this power supply unit in any of our new 45Drives storage appliance)
Dimension: (WxDxH)
101 x 84 x 300 mm
3.98 x 3.31 x 11.81 inch
3-31/32 x 3-5/16 x 11-13/16 inch
Connectors:
-
1x 24-pin Main Connector
-
1x 8-pin EPS 12V
-
1x 4-pin P4 12V
-
1x 6-pin AUX
-
13x 4-pin Peripheral / IDE Power
-
3x 4-pin Floppy Power
-
1x 2-pin 3.68mm Buzzer Reset
-
1x 2-pin 2.54mm TTL Signal
-
1x LED Indicator
Features:
-
Active PFC (Full Range), meets IEC-1000-3-2 Class D
-
Max. +12V Current: 32A
-
Hot-Swappable / Hot-Pluggable Redundancy Function (2+1)
-
Dual EMI Noise Inlet Filter: FCC Class B, CISPR22 Class B
-
Safety Approvals: UL 1950, CSA 22.2 No. 950, TUV IEC 950
-
Hold-Up Time: ≥16ms at full load & 90VAC input
-
Uses 48-pin industrial connectors
-
Optional: Serial ATA support
Temperature Range:
-
Operating: 0°C ~ 40°C
-
Storage: -20°C ~ 70°C
Humidity:
-
Operating: 20% ~ 95%
-
Non-Operating: 10% ~ 95%
85% is typical; 95% with conformal coating process
Cooling:
-
2x 38x38x28 mm DC Fans (per module)
-
Independent AC inlet per module
AC Input:
-
Voltage: 105 ~ 264VAC Full Range
Specification:
Output Wattage: 500W
Supported Standards: ATX 2.03, ATX12V (P4), EPS12V, WTX, AMD-GES
Best Suited For: Server, Workstation, Storage System, IPC
Output Characteristics:
Output | Voltage | Min. Output Current | Max. Output Current | Regulation | Line Regulation | Ripple & Noise (Max P-P) |
---|---|---|---|---|---|---|
+5V | 5V | 2.0A | 30.0A | ±5% | ±1% | 50mV |
+12V | 12V | 2.0A | 32.0A | ±5% | ±1% | 120mV |
-5V | -5V | 0.05A | 0.7A | +5% ~ -10% | ±1% | 120mV |
-12V | -12V | 0.05A | 0.7A | +5% ~ -10% | ±1% | 120mV |
+3.3V | 3.3V | 1.0A | 24.0A | ±5% | ±1% | 50mV |
+5VSB | 5V | 0.1A | 2.0A | +6% ~ -5% | ±1% | 50mV |
Remarks:
Combined +5V and +3.3V output must not exceed 43A
Total output power must not exceed 500W
This power supply is intended for integration in chassis assemblies only
Final system must comply with relevant EMC and safety standards
Corsair HX750 – 750W Fully Modular ATX Power Supply
(Disclaimer: We are no longer using this power supply unit in any of our new 45Drives storage appliance)
Dimension: (WxDxH)
150 x 180 x 86 mm
5.91 x 7.09 x 3.39 inch
5-29/32 x 7-3/32 x 3-13/32 inch
Connectors:
-
1x 24-pin Main Connector
-
2x 8-pin (4+4) EPS12V CPU
-
4x 6+2-pin PCIe Power
-
12x SATA Power
-
4x 4-pin Peripheral (Molex)
-
1x Floppy Adapter (via Molex)
Features:
-
80 PLUS Platinum Certified (high efficiency operation)
-
Zero RPM Fan Mode (fanless operation at low loads)
-
Fully Modular Cabling
-
Active PFC (Full Range)
-
100% Japanese Capacitors
-
Single +12V Rail Design
-
Protections: OVP, UVP, SCP, OPP, OTP
Temperature Range:
-
Operating: 0°C ~ 50°C
-
Storage: -20°C ~ 70°C
Humidity:
-
Operating: 20% ~ 90%
-
Non-Operating: 10% ~ 95%
EMI / Safety:
-
FCC, CE, TÜV, RCM, cTUVus, CB, CCC, BSMI
-
ErP Lot 6 2013 Ready
Cooling:
-
1x 135mm Fluid Dynamic Bearing Fan
-
Zero RPM fan mode (below ~40% load)
Input Voltage:
100V ~ 240V AC (Auto Range)
Specification:
Output Wattage: 750W
ATX12V v2.4 / EPS12V 2.92 / ATX12V 2.31
Output Characteristics:
Output | Voltage | Min. Output Current | Max. Output Current | Regulation | Line Regulation | Ripple & Noise (Max P-P) |
---|---|---|---|---|---|---|
+3.3V | 3.3V | 0A | 20A | ±3% | ±1% | 30mV |
+5V | 5V | 0A | 20A | ±3% | ±1% | 30mV |
+12V | 12V | 0A | 62.5A | ±2% | ±1% | 120mV |
-12V | -12V | 0A | 0.3A | ±10% | ±1% | 120mV |
+5VSB | 5V | 0A | 3A | ±5% | ±1% | 50mV |
Remarks:
Combined +3.3V and +5V max output: 100W
+12V max output: 750W (Single Rail)
Total output power must not exceed 750W