45 Drives Knowledge Base
KB450138 - How to install and start the Highpoint Web GUI in CentOS
https://knowledgebase.45drives.com/kb/kb450138-how-to-install-and-start-the-highpoint-web-gui-in-centos-6/

KB450138 - How to install and start the Highpoint Web GUI in CentOS

Posted on March 18, 2019 by Rob MacQueen


  1. Download web GUI from our server to your server:
wget http://images.45drives.com/Drivers/WebGUI-Linux-v2.1.6-131017.tgz
  1. Unzip the file:
tar -xzvf WebGUI-Linux-v2.1.6-131017.tgz
  1. Run the file for install:
rpm --install WebGUI-Linux-v2.1.6-131017.rpm
  1. Make sure that the Highpoint port is added as an exception in iptables:
firewall-cmd --permanent --add-port=7402/tcp
firewall-cmd --reload
  1. Start the hptdaemon service:
/etc/init.d/hptdaemon start
  1. Access Web GUI:
http://<YOUR_IP>:7402/
KB450138 – How to install and start the Highpoint Web GUI in CentOS – 45 Drives Knowledge Base

KB450138 – How to install and start the Highpoint Web GUI in CentOS

Last modified: November 2, 2020
You are here:
  • KB Home
  • Centos
  • KB450138 – How to install and start the Highpoint Web GUI in CentOS
Estimated reading time: < 1 min
  1. Download web GUI from our server to your server:
wget http://images.45drives.com/Drivers/WebGUI-Linux-v2.1.6-131017.tgz
  1. Unzip the file:
tar -xzvf WebGUI-Linux-v2.1.6-131017.tgz
  1. Run the file for install:
rpm --install WebGUI-Linux-v2.1.6-131017.rpm
  1. Make sure that the Highpoint port is added as an exception in iptables:
firewall-cmd --permanent --add-port=7402/tcp
firewall-cmd --reload
  1. Start the hptdaemon service:
/etc/init.d/hptdaemon start
  1. Access Web GUI:
http://<YOUR_IP>:7402/
Was this article helpful?
Dislike 0
Views: 169
Unboxing Racking Storage Drives Cable Setup Power UPS Sizing Remote Access