|45 Drives Knowledge Base
||KB450173 - Ceph Explanation of Services and Recommended Network Configuration
Below you will find a reference diagram for a typical 3 node Ceph cluster.
Ceph is a license free, open source storage platform that ties together multiple storage servers
to provide interfaces for object, block and file-level storage in a single, horizontally scalable
storage cluster, with no single point of failure.
Ceph clusters consist of several different types of services which will be explained below:
This type of node is where ansible will be configured and run from. They provide the following
● Centralized storage cluster management
● Ceph configuration files and keys
● Optionally, local repositories for installing Ceph on nodes that cannot access the Internet
Each monitor node runs the monitor daemon ( ceph-mon ), which maintains a master copy of
the cluster map. The cluster map includes the cluster topology. A client connecting to the Ceph
cluster retrieves the current copy of the cluster map from the monitor which enables the client
to read from and write data to the cluster.
It's Important to note that Ceph can run with one monitor; however, it is highly suggested to
have three monitors to ensure high availability.
Each Object Storage Device (OSD) node runs the Ceph OSD daemon ( ceph-osd ), which interacts
with logical disks attached to the node. Simply put, an OSD node is a server, and an OSD itself is
an HDD or SSD inside the server. Ceph stores data on these OSDs. Ceph can run with very few
OSD nodes, where the minimum is three , but production clusters realize better performance
beginning at modest scales, for example 5 OSD nodes in a storage cluster. Ideally, a Ceph
cluster has multiple OSD nodes, allowing isolated failure domains by creating the CRUSH map.
Each Manager node runs the MGR daemon ( ceph-mgr ), which maintains detailed information
about placement groups, process metadata and host metadata in lieu of the Ceph
Monitor— significantly improving performance at scale. The Ceph Manager handles execution
of many of the read-only Ceph CLI queries, such as placement group statistics. The Ceph
Manager also provides the RESTful monitoring APIs. The manager node is also responsible for
dashboard hosting, giving the user real time metrics, as well as the capability to create new
pools, exports, etc
Each Metadata Server (MDS) node runs the MDS daemon ( ceph-mds ), which manages
metadata related to files stored on the Ceph File System (CephFS). The MDS daemon also
coordinates access to the shared cluster. The MDS daemon maintains a cache of CephFS
metadata in system memory to accelerate IO performance. This cache size can be grown or
shrunk based on workload, allowing linearly scaling of performance as data grows. The service
is required for CephFS to function.
Ceph Object Gateway node runs the Ceph RADOS Gateway daemon ( ceph-radosgw ), and is an
object storage interface built on top of librados to provide applications with a RESTful gateway
to Ceph Storage Clusters. The Ceph Object Gateway supports two interfaces:
S3 - Provides object storage functionality with an interface that is compatible with a
large subset of the Amazon S3 RESTful API.
Swift - Provides object storage functionality with an interface that is compatible with a
large subset of the OpenStack Swift API.
45Drives Recommends a 10Gigabit Backbone for all Networks
Ceph should be deployed on 2 separate Networks.
45Drives Recommends bonded interfaces for the Public and Cluster Networks. To achieve this, Nodes should have 2 Dual Port NIC Cards, bonding the top port on each Card for the Public Network, and the bottom two ports on each card for the cluster Network. This is to protect against controller failure.
Each Interface should have its own IP
Bonding Mode Recommended is LACP
Other methods include Active backup, and Adaptive Load Balancing.